The main purpose of this program is to convert standard WAV sound files to 
Akai S900/S950 disk images (IMG and HFE).

This provides an alternative to manually sampling via the analog input, or 
transferring wavesamples over MIDI by using tools such as WAV_AKAI 98.05 or 
S900DUMP.

WAV2AKAIS9 will batch convert as many WAVs as are supplied. WAVs can be 
located within subfolders, but with a caveat: Each WAV needs to have a unique 
filename, or else some disk images will be missing upon creation.

akaiutil is an alternate software with many more capabilities, if one needs a 
comprehensive Akai S900/S950 disk image management tool.

https://sourceforge.net/projects/akaiutil/


==========
CONVERSION
==========

- Move/copy all WAVs into the [WAV_IN] folder. These can be of any bit-depth, 
  sample rate, and length. Both stereo and mono WAVs are accepted, but the 
  resulting wavesamples will be reduced to mono.

- Run the "WAV2AKAIS9 (S900)" command to create 800K DD disk images which can 
  be used by the S950, but are required by the S900.
  
  Run the "WAV2AKAIS9 (S950)" command to create 1600K HD disk images which are 
  only usable on the S950, but not the S900. While S950 units without memory 
  expansion have the same amount of RAM as the S900, all S950 samples can use 
  HD floppies with twice the amount of storage as the S900. Therefore, it is 
  possible to store more on an S950 floppy than can necessarily be loaded into 
  RAM, if the S950 has no memory expansion.
  
- Select the target sample rate. These choices work just like the sample rates 
  available when sampling through the analog inputs. In other words: The lower 
  the sample rate, the longer the wavesample can be in terms of seconds.

- Either write the resulting IMG files to floppy disk using Omniflop, or use 
  the IMG/HFE files directly with floppy emulators such as Lotharek HxC, 
  Gotek+HxC, or Gotek+FlashFloppy.
  
  
========
PLAYBACK
========
  
No programs are created during this conversion, and there is only one sample 
stored per disk. Loading the disk on the Akai, and press "Edit Sample" to see 
the new wavesample. It should share the name of the original WAV file. Press 
the "PB" (playback) button to listen to wavesample.

Further manipulation is left to the user, as it is assumed the S900/S950 owner 
guides have been read and understood. 
  
  
==============
CONSIDERATIONS
==============

WAV2AKAIS9 (S900) @ 40,000 Hz can convert a WAV of up to 11.8 seconds. Reduce 
the target sample rate if longer times are needed. For example: 7500 Hz will 
save approximately 63 seconds worth of sound material.

WAV2AKAIS9 (S950) @ 40,000 Hz can convert a WAV of up to 23.6 seconds. 7500 Hz 
will provide over two full minutes of sample time!

48,000 Hz support for S950 is only enabled when authoring S950 HD disks, 
although technically 48,000 Hz samples could be written to DD as well. This 
limitation is simply to preserve full S900 compatibility with any DD image.